60-100W Hot Melt Hand Gun
Basic Info
Model No.: KV-JQ10001
Product Description
60-100W Hot Melt Hand Gun Features:
100% Brand New.
Color: violet,yellow,red,blue,green,white,black,etc
Voltage: AC 100-240V
Plug: US Plug . EU Plug.UK Plug.AU Plug.Korea Plug etc
Frequency: 50/60Hz
Number of glue sticks: 2 (Length 100 cm)
Suitable for bonding wood, metal, glass, fabric, plastic, ceramics and card.
The heater component of the product is made of positive temperature Coefficient electric resistance (PTC). It is heating very fast and automatic of control temperature.
The hot melt glue gun can use normally in 100V to 240V power supply. be free from the electric voltage motion to limit, inside place the fuse, use more safe.
This series product can be use the diameter from 10.8 mm to 11.5 mm of the melt glue.
Insert the gum from the glue gun tail, sent to the glue gun tube, put on the power supply to preheating from 3 to 5 minutes. button up to move the trigger and can extrude the melt glue, and can control the melt glue quantity.
Package Content:
1 x Hot Melt Glue Gun
2 x Glue Sticks
60-100W Hot Melt Hand Gun Specification:
| Input: | 110-250V, AC, 60-100 W | Flow rate of glue: | 16-18 g/min |
| Diameter of glue stick: | 10.8~11.5 mm | Length of glue stick: | 70~300 mm |
| Application temperature: | 130~290℃ | Product weight: | 270g |
| Nozzel diameter: | 2.0~2.3 mm | Pre-heating time: | 3-5 mins |
| Product Size: | 18x15x3.2cm | Certification: | CE,GS,ROHS,KC,SAA,ISO |
| Inner box: | 10 pcs | Outer ctn: | 40 pcs |
| Inner box size: | 42x28x16 cm | Outer ctn size: | 57x43.5x34 cm |
| G.W.: | 14 kgs | N.W.: | 10.8 kgs |
60-100W Hot Melt Hand Gun Show:
60-100W Hot Melt Hand Gun General Safety Information:
1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;
2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;
3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;
4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;
If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;
If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.
5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle or melted glue;
7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.
8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it beyond any of Children palpable side;
10. Only used for melting glue stick, no other usage;
11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use after 15 minutes;
60-100W Hot Melt Hand Gun Using methods
1. Glue gun using voltage is 110-220V AC,50/60Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
5. After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug.
Product Categories : High Quality Hot Melt Glue Gun > Professional Glue Gun