High Voltage Electrical Fuse Cut-out

Scope of application

PRW8 series outdoor high voltage Drop out fuses are used in the system of Az 50Hz ,rated voltage 10KV~35KV outdoor aerial distribution lines,to protect the circuit or power transformers against overloadeing and short circurt faults,The model marked with “F” can Switch om/off loading current.The product in service will have an isolating breaker after fuse carrier drop out ,this is to secure to safety during maintaining and repairing.



This series of product s complies with the standards of GB 15166.3 and IEC60282-2.





Product feature

1. This series of product is designed as gas exhausting from one side,which it can trip overloading and short circuit fault current

reliable . and avoid the circuit or equipment on upside being damaged.

2.Upside contacting socket will use spring to give positive pressure on the upper moving contact of fuse carrier,keep good contacting .

3.General terminals can hold different conductors.one wrench can perform the connection.

4.This disconnect stick can push the fuse carrier in ON position,meanwhile it can operate for portable load cutter.

Contact us if you need more details on High Voltage Fuse. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Drop-Out Fuse Link、Polymer Drop-Out Fuse. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : High Voltage Fuse